LAUNCH CR529 OBD2 Scanner Diagnostic Tool, Full OBD2 Scanner Backup, Clear Codes, One Click I/M, for DIYers with Cars After 1996

LAUNCH CR529 Creader 529 Code Reader Full OBDII Scanner

>> Add-on Practical Features:

1. Supports multiple code requests: Generic, manufacturer specific and pending codes.
2. Clears codes, turns off Check Engine Light (CEL) and resets monitors.
3. DTC definition can be automatically displayed after reading, press “HELP” button with DTC guide for possible causes if codes show the small “?” icon.
4. Reads freeze frame data which shows engine conditions such as fuel trim, fuel pressure, engine coolant temp, etc. at the time the Malfunction Indicator Lamp(MIL) was set.
5. Reads, records, graphs & playbacks(data logging) live sensor data.
6. Reads live O2 sensor/on-board monitor test data.(Full OBD modes including Mode 6 and Mode 8)

>> Enhanced OBD II functions

CR529 obd2 car scanner can not only read and clear engine fault codes, save money for you, but also have some enhanced functions which could help you find some deep problems so that makes your diagnosis easier.

1.LED Notifications: Red-Yellow-Green LEDs and build-in speaker indicate the readiness status for smog check. This engine diagnostic tool can also help catch intermittent problems or confirm repairs during a drive cycle.
2.Data Log: Launch CR529 check code reader records PIDs for later use to help you diagnose intermittent driving performance problems which can not be determined by any other methods.
3.DTC Help: Press “HELP” button with DTC guide for possible causes if codes show the small “?” icon.
4.VIN Retrival: Automatic VIN acquisition and decoding make it much easier to read manufacturer specific codes and enhanced mode 6 data.
5.Print Data: If you are unable to determine the problem, you can print out the diagnostic data and send the data to your mechanic for help.

Launch CR529, A Must Check Engine Code Reader for Every End-Users & DIYers

LAUNCH all-in-one check engine light code reader CR529.

It allows you to switch off MIL or Check Engine Light faults in seconds. With the I/M shortcut key, you can get quick access to the I/M readiness function.

The following 3 LEDs are used as visual aids to make it easier to determine engine system conditions.

GREEN LED (No Fault Code) – Indicates that all engine systems are running normally

YELLOW LED (Pending Fault Code) – Indicates the currently displayed DTC is a Pending DTC

RED LED (Permanent Fault Code) – Indicates the currently displayed DTC is a Permanent DTC

LAUNCH CR529 – An Advanced OBD2 Scanner

Record & Review & Print
The DTC, Data Streams, and Freeze Frame can be recorded in this OBDII scan tool so that you can review the data repeatedly when repairing. Also you can print the records out via a USB cable connection to a PC, and then share the records with mechanics for professional advice

DTC Lookup & Help Key
Featuring the DTC Lookup, Launch CR529 can save you the trouble of looking for the meaning of a DTC on the internet, and show you the detailed definition from the DTC library. Moreover, the HELP shortcut can help you quickly access to the detailed descriptions/tips for diagnostics.

Retrieve VIN, CIN, CVN
This Launch scan tool CR529 can retrieve the vehicle information, such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc., which offers help and convenience to users for repair or parts replacement.

Plug & Play + No Battery
Launch CR529 OBD2 Scanner is a “Plug and Play” device without battery for not worrying about battery drain. When you plug its diagnostic cable into the vehicle’s DLC socket, the code reader will get the power directly from the vehicle and start working, which is pretty easy for beginners.

Lifetime Update via a PC
You can contact with us by email directly for getting the Update Tool , then connect this OBD2 scanner to a PC via the USB cable, and choose the latest version to update. Notice: Launch CR529 connecting with PC only support Windows, no MAC book. (It’s not easy to install the update tool with Launch Official Website because of some prompts)

2.8″Colorful LCD Screen
This code reader comes with a 2.8″ screen for good visual effects. So it is capable of completely displaying the menu interface and its contents. Besides, the colorful LCD display also makes it possible to indicate test results clearly when the environment is dim.

Wide Vehicle Compatibility
As it supports all OBDII protocols: KWP2000, ISO9141, J1850 VPW, J1850 PWM and CAN (Controller Area Network), the CR529 scan tool can work with most 1996 and newer OBDII compliant vehicles sold in the American, European, and Asian.

Multiple Languages Support
A multilingual data support system with 7 universal languages: English, Portuguese, Russian, Italian, Spanish, French and German within this OBD2 scanner’s bracket, which allows for the reading of data in the user’s language of choice.So you need no effort in trying to get translations, as far as the code meanings and repair formulas are concerned.

Package includes:

1pc x LAUNCH CR529 Code Reader

sales@obdstars.com